Anker Powercore II 20000 with PIQ 2.0 (Review)

#1

After a months usage, Here are my thoughts :

*Design : slim, ridged - less prone to scratches.
*18W PIQ 2.0 port - after testing it on my HTC 10 (quick charge 3.0 device) the PCII 20000 charges just as fast, infact a tad faster than the QC 3.0 wall charger.

I actually prefer the PIQ 2.0 tech over the QC 3.0 protocol considering the levels of protection Anker offers.

*12W PIQ 1.0 port - Ankers original generic quick charge solution does the job for almost any device out there.
*8 LED wheel indicator shows accurate charge levels.
*PIQ 2.0 Input port - recharges pretty damn fast with my QC 3.0 wall charger.

IMAG2714.jpg4000×3000 2.37 MB
IMAG2712.jpg3000×4000 2.26 MB
IMAG2709.jpg3000×4000 2.61 MB

#2

Thanks for sharing you review. Do you have any photos of the product in use which you could also share?

1 Like
#3

Why did you repeat your post of 15 hours earlier as a new thread?

https://community.anker.com/t/my-quick-personal-review-of-the-powercore-ii-20000/55156/20

1 Like
#5

I think you probably know the answer to that one :grin:

@nigel1812 Are you planning on expanding your review further? If so the thread can remain and your post in the other members review can be removed. If not this thread can be closed as it does seem a waste to have a seperate duplicate thread which just equates to a previously posted comment.

1 Like
#6

I’ve edited my removed above with pictures. You may proceed to delete my review on the other thread, thanks.

#7

Your battery pack is not fully charged :stuck_out_tongue_closed_eyes:

1 Like
#8

It fully charged my HTC 10 (3000 mAh) and hence just 7 LEDs :wink:

#9

Where did you get the cloth case from? Can you provide a link?

#10

The case comes with the powerbank

1 Like
#11

Thank you!