SoundCore 2 Issues with Bluetooth Pairing/Switching devices

#14

Hi @TechnicallyWell , thank you for your help in suggesting some things… I have tried all the steps you shared Just like @Thomas_Grimes I have not gotten this to work properly.

Further, I called Anker Support, they didnt give me any steps to try they just told me they were going to send me a brand new speaker. I got the new speaker a few days ago and still no luck with this issue. I’m trying all of the same steps with the new speaker they sent me and the problem persists. Its impossible to switch the speaker back and forth from devices unless you tell your devices to “forget” the speaker then re-pair it.

I am really curious to hear if anyone at all can switch the speaker to different devices without this issue, especially since I got a brand new speaker from Anker and its still not working, it seems like this could be a more serious product flaw?

1 Like
#15

HI @nigelhealy I don’t think this is normal behavior? Every other bluetooth speaker/headphones etc from many other manufacturers I’ve used has allowed me to switch which device I’m connected to. Depending on the device sometimes its finicky how you can switch bluetooth connections, but it works at least. (E.g. sometimes you must turn off bluetooth on the device you’re currently connected to before you can connect to another device… etc).

As example I have the Jaybird X3 bluetooth headphones, and I can switch between devices seamlessly without even turning off bluetooth on the devices I’m switching away from.

The issue with this Anker speaker is that the only way to switch between devices you’ve connected it to it is to manually tell your device to “forget” the speaker, then do a fresh re-pair.

1 Like
#16

Works fine on my Android devices.

1 Like
#17

@zach1 and @TechnicallyWell, I actually reached out to the Anker support team via email. Here is their response:

We are sorry to know you have connection issues for switching the speaker between different devices.

Please be advised that the speaker will auto connected to the last
paired device. If we want to pair the device with a second device, we
need to forget the speaker from the last paired device first. However,
sometimes we cannot switch the speaker smoothly due to the different
Bluetooth versions. In this case, you can try resetting the speaker by
holding the power button for 8s to solve the problem. Could you please
try again to see if it works?

Thank you and we are looking forward to hearing from you.

I did reset the speaker, as instructed, but this did not resolve the issue. According to the support representative, it seems that we are indeed required to “forget” other devices in order to switch. I agree with @zach1 that all of the other Bluetooth speakers I’ve owned allowed you to pair numerous devices (only pairing on the first occasion for a given device) and you could then switch freely between devices from then on. This appears to be a feature flaw on an otherwise good product.

2 Likes
#18

@TechnicallyWell, were you able to try it out on your Soundcore. And are you using a older Soundcore or the Soundcore 2?

#19

Hi there!
I have the same problem with my Soundcore 2. I can pair it with my PC and then with my android phone. But if I try to reconnect to PC, which was the first device, I just can’t do this. The only way to reconnect to the previous device is to fully delete the pairing history, so to do this, I need to hold longer the bluetooth button on the speaker. It’s annoying, because my previous bluetooth speaker from Philips was working OK, so I was able to change the devices without issues while sitting on the couch :confused: Philips has got even a standby mode when plugged in to the charger, so I don’t even turned it off and the speaker connected to my devices automaticaly after I were back from work. In this point is Soundcore 2 really annoying and I’m considering a return. :frowning:

2 Likes
#20

@Thomas_Grimes, sorry for my delayed response as I had some unexpected travel come up.
I tested this out on the SoundCore 2 and it does seem that the first phone was not able to reconnect without first “forgetting” the speaker in the iPhone’s Bluetooth settings.
I know this feature is important to you and I know Anker wants you to be completely satisfied with your purchase, so feel free to either reply to your email with Anker support or visit the refund information page to discuss your options. Thank you for your patience!

3 Likes
#21

No problem, @TechnicallyWell! I am in the proces of working with support on a refund.

Thank you so much for your continued assistance in troubleshooting this issue. Anker definitely gets an A+ in my book for customer service.

Tom

4 Likes
#22

I’m having the same problem with my newly purchased SoundCore 2, which my son and I are sharing. I’m returning mine to Amazon. Surprised a company that makes such quality products like Anker would market a flagship speaker with such a glaring flaw. This is the only one of my Bluetooth speakers that doesn’t pair automatically with an unlimited number of previously paired devices. A shame, as this is a really nice speaker. Grab it if you’re only pairing with one device!

#23

Try only pressing the bluetooth button on the SoundCore 2 once for 2 seconds. Each time you redo that you are forcing the device to un-pair other devices. You could try the 8 second power reset too.

In summary:

  1. Forget the SoundCore 2 from all devices
  2. Reset SoundCore 2 (8-sec power button) (might be unnecessary)
  3. 2-sec on BT button, see flashing blue light
  4. Connect 1st device - solid blue, then disconnect (do not choose “forget”), flashing blue
  5. Connect 2nd device, then disconnect
  6. Connect 3rd device, then disconnect
    And so on…

I have 4 devices on my SoundCore 2 and it looks like I can switch between them without re-pairing.

1 Like
#24

Hey @Doug01 , I’m curious what devices you have connected where you’re able to switch between them without re-pairing. I have tried a lot of things and am using a replacement speaker Ankur sent me, but I still have to “forgot” a device and re-pair it every-time I want to switch.

I’m trying to connect the speaker to iPhone 7 plus on 10.3.3, iPhone 7 on also on 10.3.3, and Macbook Pro.

Ankurs response to my support email is a bit confusing as to whether this is a problem with my speaker or a normal behavior of the speaker. I think that they are saying it is a normal behavior and that The Soundcore 2 will not automatically switch between previously paired devices on startup. It only will connect automatically to the LAST device with which it was paired.

Ankur’s Comment on the issue:
With regards to the connecting issue, kindly note that this speaker can automatically pair with the last device which it paired, if your speaker had paired with a different Bluetooth device, you should first remove it and then re-connect them.

Honestly I’m really more surprised that people aren’t complaining about this issue on this forum, or on Amazon etc.

Despite how frustrating this is I have to admit Ankur support has been really nice about it and as per usual the customer support is very good.

1 Like
Problems with bluetooth of Soundcore 2
#25

What is there to complain about if that is how the speaker is designed to be? I currently own x4 SoundCores which get alternated between an iPhone, Chromebook, iMac, iPod Touch, work phone and I can say the 30 secs to forget and pair to another device doesn’t cause me that much stress…

Members / owners could always make a suggestion to Anker for allowing pairing of multiple devices for a future revision or new product.

#26

I’m having a discussion here on the Ankur forum to get feedback from other owners to see if they have this connectivity problem, and to engage with Ankur for product feedback. Perhaps complain is not a good word, and sure you are correct its only 30 seconds to do this step, but no other speaker on the market that I’ve tried will make you do this to switch devices, so for that reason I think its a big deal

#27

Hi @zach1,

iPhones, Macbook, Windows laptop. Same iOS version as you. Did you try my steps?

Pair all your devices that first time and stop pressing the BT button for 2 seconds as this unpairs older devices. Pair your first device, disconnect via the device, pair your second device, disconnect via the device, etc. I’m not sure this has to all be done at the same time but it worked for me (in other words in my case can I add a fifth device when the SoundCore 2 powers up provided I have no other devices grabbing the BT radio - don’t know). Repetitively pressing the BT button on the Anker SoundCore 2 for 2 seconds means you’ll be forever forgetting and re-pairing all your devices, which I don’t have to do.

Let us know if that works for you

1 Like
#28

Indeed it is a flaw. I’m having this exact same problem. No other bluetooth speakers I have (which are many!) have this problem. Having to forget a device and pair it anew is rather silly. At a minimum, I should be able to shut off bluetooth on one of the devices so it connects to the other, but not even that works.

The SoundCore 2 sounds great and has a great price, but this bluetooth bug is more hassle than the speaker is worth. I regret buying three and recommending the speaker to friends.

1 Like
#29

Hi @D_93654, did you try the method I suggested. I don’t have to “forget” any devices. I agree the manual is not clear. Pressing the BT button resets all pairings (only do this one time if you want to connect multiple devices). You have to “disconnect” from various devices to get them all paired. I have 4 devices I can connect with my SoundCore 2 and never have to “forget” and re-pair any of them. Good luck.

1 Like
#30

Hi there,

I’m having similar problems with the pairing of multiple devices with Soundcore 2.
I pair and connect the first device, disconnect and then turn on and pair the second device. When I turn off (or disconnect via settings) the second device, the first one cannot connect automatically, nor by holding the Bluetooth key on the speaker, nor by clicking the connect button in the settings of the device. The only way to reconnect the first device is to do “forget this device”, turn off/turn on the Bluetooth in device setting and pair the device from scratch.
I’ve tried the steps that @Doug01 mentions and that didn’t work too, I’m not sure how he managed to that at all because this - and also from all other posts - is some fundamental flaw of this product especially considering its nature. Being able to relatively easy switch between devices is essential for a movable speaker, which can be used by more than one device and one person (and one who also have a couple of devices).
From what I see on this thread nobody has given a solution for this matter, nor has Anker support have come clear about their product which btw is a best seller, and also for all the other points - battery life, quality of materials, good sound for the price range - a very good quality product.
If somebody has a viable solution you are more than welcome…

1 Like
#31

You can always reach out to support@Anker.com and ask them for help. Ad far as I know the speaker is not designed with multi device support, maybe a future update will fix that but it’s also a limitation of the bluetooth standard that is used

1 Like
#32

Hi @Andrej_Andreev ,

Are you pressing the BT button on your speaker a second time (ie. after the first pair) to pair the second device? Per the steps I wrote on Sep 3 pressing the BT button a second time is what caused me problems. Once I stopped doing that (ie. only pressing it once) I was able to keep multiples devices paired.

3 Likes
#33

I am connected with 3 devices on th SoundCore 2 and have no issues.
Devices: iPhone 6, Kindle Fire 8 HD., Alcatel android phone.
I originally connected the devices by disconnecting through the settings on each device.
I also tried pressing the bluetooth button on the soundcore 2 and had 2 different results. When i held down the button for a second then i needed to forget and reconnect the devices. When i tapped the button, it disconnected from the current device but i was easily able to reconnect by selecting the soundcore 2 in my bluetooth settings.
The kindle fire 8 hd connects automatically but the other 2 devices i need to select it from the bluetooth menu.

1 Like