Official Anker Fan Swag Design Contest

TheCharneco · January 31, 2019, 6:25pm

Here’s my concept for an Anker shirt. I tried to incorporate as many Anker products as possible. It’s a one color design using PMS 2995 C, so it’ll be more cost efficient to produce. This is a fun contest and was a nice break from what I should be doing at work. LOL!

Here’s another concept I had floating around that’s a little simpler, but has branding on all sides of the shirt and uses the hashtag #UseAnkerInstead.

Here’s the original, but slightly different per @Jesse_Hernandez1’s suggestion.

In regards to Jesse’s comment below: An italicized A is asymmetrical, isn’t is? I kept everything on one side to make it a cost efficient design, but could be cool like you mentioned. I don’t have time to draw anymore products at the moment, so I won’t be cramming any more into there. LOL

TheDude · January 31, 2019, 5:44pm

@TheCharneco
Very nice I would wear that shirt

I had a similar idea in mind about using as many Anker products as possible, I guess it’s back to the drawing board for me

Chiquinho · January 31, 2019, 5:44pm

Good design, well done.
Though I dont wear any T shirts I would like one for my greedy son!

TheCharneco · January 31, 2019, 5:48pm

Haha. Thanks, guys!

I feel like there are only so many possibilities when using the products, but what if you did something with all the products on display forming a large square of items?

TheDude · January 31, 2019, 6:02pm

I think you could have squeezed a few more products in there if you made the “A” asymmetrical. Hmm asymmetrical A sounds kind of funny right?

I’d like to see your design with the “Anker” text moved to the right sleeve and IQ/lightning bolt on the back by the neck.

Quinn_Armstrong · February 6, 2019, 9:38pm

Here are a couple I threw together! Would love honest feedback and suggestions!

Design One: (with or without Anker logo)

Design Two:

Design Three:

NEW!: Added 4th Design showcasing the community logo and the new USB C to Lightning Cable!

TheDude · January 31, 2019, 6:21pm

I would keep all of my submissions in one post though so you’re not splitting up your likes.

TheCharneco · January 31, 2019, 6:23pm

Good point…Moving post 2 to post 1. lol!

TheDude · January 31, 2019, 6:26pm

Loving that first design and what you did with that lightning bolt. The Anker text does look a little off though maybe if you matched the angle of lightning bolt or made the lightning bolts a little smaller and the text a little bigger.

MSTR · January 31, 2019, 6:27pm

Here my designs

TheCharneco · January 31, 2019, 6:28pm

I really like the first design with the moving Anker graphic. I like the color work you did on it too! Not the biggest fan of the second version with “Anker” plus the moving graphic, but I like all the others.

TechMan · January 31, 2019, 6:29pm

Wow. Those are very nice designs. Good job. I think you have a good shot at winning!

MSTR · January 31, 2019, 6:30pm

i wanted the simple look to it… Think i might make a couple more later…

Quinn_Armstrong · January 31, 2019, 6:31pm

Thank you, I threw it in their in case Anker wanted to have the name on it as well. Maybe add to the sleeve or to the front pocket with bolt logo.

TheDude · January 31, 2019, 6:35pm

Wow there’s a lot going on there, it’s a little too “busy” for my taste though.

I like the PCB idea but think it could be more visually appealing.

Maybe something like this

ncro · January 31, 2019, 6:47pm

Come on dude. You basically copied my design with the lightbulb.

MSTR · January 31, 2019, 6:50pm

no i thought of that before i made this t shirt

ncro · January 31, 2019, 6:49pm

Whatever.

ncro · January 31, 2019, 6:57pm

I’m editing my design.
Check it out, it’s post #51.

TheDude · January 31, 2019, 6:55pm

@Muhammad_02
@ncro

It’s not an original idea. Anker’s shirt from 2017 had a similar light bulb.

@joshuad11 shirt from 2017

Imitation is the sincerest form of flattery