Pretty sure Steven Yang said it somewhere in here: https://www.theverge.com/2018/11/6/18065922/vergecast-podcast-interview-anker-steven-yang-usb-c
PowerPort Atom PD 4 wattage?
2 Likes
If that’s so, then I wonder where the other 16W are coming from to claim a 100W output (60W for C ports + 24W for A ports). I guess the A ports may be rated to output up to 3A (which still leaves 10W missing) but even if so, there is no standard that takes more than 2.4A without violating USB spec, as far as I know.
If they’re rated to 3A for safety reasons, like brownout protection due to out-of-spec cables with the wrong resistor (like were rampant in the early USB-C days and which Benson Leung helped kill from Amazon), then it would be a bit misleading to advertise 3A output for A ports cause no device within safety limits and within standards will use it. Plus there’s still the 10W missing.
Their existing powerport with one USB C and one USB A says that it can supply 19.5W though the USB A,
So combining the two USB C with two USB A, gets us to 99W …
You mean the Powerport II, with “PowerIQ 2.0”, right? The specs sheet in the manual says it’s 18W, but in any case, close enough I guess. It seems PowerIQ 2.0 might be emulating Qualcomm’s QuickCharge, since AFAIK there’s no other standard that mobile devices use that does 9V/2A and 12V/1.5A, besides Samsung’s but that also seems to be based on QuickCharge.
Power IQ 2.0 is Ankers version of quick charge 2.0. and if you look or research there’s a handful if companies that offer something similar, as it’s a way around having to license the QC tech from Qualcomm
1 Like
Yeah, i need to buy that sometime…
1 Like
I need something before my late December trip to charge my laptop (USB-C up to 65w), phone (USB-C or A), camera, DAP etc.and doesn’t look like PD 4 will be out or even PD 1.
can someone recommend a USB-C+A charger available now?
edit: found these so far:
https://www.monoprice.com/product?p_id=33467
both pretty bulky. the thin ones i posted might be better. see if anker releases PD 4 soon.
Early Power IQ 2.0 was 18w now PIQ 2.0 is 19.5w to overcome losses in the cable.
2 Likes
I recommend making your device decisions at the same time as your charger decisions.
Some of the asks we see here are ridiculous from an electrical perspective. 100W is going to be a huge lot of heat to put into a small form factor, you’re inevitably going to have to have a thin slab type shape to dissipate heat, and if you did that as a wall charger you either have something which falls out of the wall socket or won’t work in confined spaces.
You can get close to this via multiple chargers and then use one of them in the wall or use two wall sockets or put them either side of an extension cord which goes in the wall. You then got 3 ways of plugging in.
So I think we’re looking at slower chargers which in the wall or full power chargers on the end of cords.
I just spent a couple of hours with some isopropyl alcohol and some q-tips to clean a >2.5 year old Pixel C keyboard… because that tablet’s 3A 5V input works well with shipping Anker products in a compact form factor for all of the chargers and Powercore.
Every time I looked at newer devices I hit some kind of power problem. Not a good answer for late 2018, because come 2019 to make a 2016 tablet still work will involve an hairdryer and screwdrivers.
1 Like
Glacial pace, indeed! Atom was to be released in November … Wonder if Anker is taking cues from Apple, esp with respect to Apple’s apparent vaporware known as AirPower …
1 Like
They have said and already stated numerous times that the atom went back to the drawing table for more refinement. We would rather have a safe and effective product than one rushed to the market full if defects and safety hazards. Sure Anker has fallen behind, but at least they are determined to get it right when it is released some time in the first quarter next year
1 Like
Good, no rush jobs!
So, you’re saying Anker is not like Apple after all … i.e., at least Anker is advising why the Atom is delayed, versus Apple’s radio silence on AirPower. 
Anker is not taking cues from Apple as they are being very clear that they pulled the product for improvements. Apple meanwhile always has a tendancy to dangle the carrot but never show it until it is perfect, or if its a failure it gradually fades away.
Ok, so it looks like the USB-C ports themselves are capable of outputting up to 100W. Both A ports are PowerIQ 1.0 so capped at 12 each. That leaves 76W for PD when both are in use.
1 Like
I know I’m late but I love this unit and it consistently supplies 60W to my laptop: https://www.amazon.com/dp/B00WM93M9S/
I was really hoping that the PD 4 would support up to 100w if there was only one port in use. My 15in MBP came with an 87w behemoth of a power brick. I was hoping for something smaller, but still as powerful.
Any detail about dimension and weight?