Thought it was supposed to be 2 days 
Eufy Security - No recordings when internet is down
Box says 10 hours
Just looked at the box and it does say 10 hours
Care to explain???
Another item falsely advertised
2 Likes
It appears that Eufy has made some changes for the better. Last night our internet provider had scheduled maintenance for 6 hours. During this time I was able to access the Eufy app and watch live vision from the cameras (previously this was not possible). I wasn’t able to view past local recordings however. I forgot to test if it still made recordings during this time. Baby steps, keep it up Eufy, nearly there on this issue.
Eufy servers are currently down, and users have NO ACCESS to their security systems. What BS!!!
1 Like
I just happened to test this myself. When the home Wi-Fi or internet is down, the system does continue to work without home power. When the system states its on back up power, the home base and cameras continue to operate like they should. The only side effect is you will not get any notifications due to the internet being down.
But the system seems to be self contained and continues working like it should. Now if the system had cellular capability then it would work seamlessly in the event of a power failure as you would still get notifications even if your home internet is down.
Now why V2 got rid of the backup power supply is unknown to me, they should have added cellular capability if anything that way there’s still live feeds active in the event of a power failure.
Instead, V2 got rid of the battery backup and now if there’s a power failure the whole system is down…wtf…
Even though Eufy uses a SD card to record locally, it probably uses an Eufy internet server as an intermediate. This explains why you cannot access local recordings locally when you are on the same local (wifi) network when the Internet goes down. They could fix it with a different software approach, but apparently they heavily rely on external Efy servers.
Which makes me kinda sceptic about privacy. Eufy is owned by Anker, which is a Chinese company. The border between Chinese companies and Chinese state is small, so in terms is privacy, this may be an issue. I want zero reliance on external servers. Camera data is private data. Any architecture design that suggest that this data may leak outside, should be avoided.
1 Like
Hello!@LBX Sincerely apologize for all inconvenience and confusion caused by the privacy security!
The system is designed to maintain a high level of security to keep your uploaded videos private and secure in the cloud: Military-grade AES-256 encryption protects your account information, and bank-grade AES-128 encryption protects your local storage. Account authentication over a secure HTTPS connection prevents eavesdropping.
Only users who have both the login name and password can access eufyCam and previous recordings. Videos on local storage cannot be read directly by a desktop computer. Access to videos on local storage is possible only via the EufySecurity app, through a web portal, or a eufy desktop application with the correct login information. The web portal and eufy desktop application will be available in a future software update. Communication between the HomeBase and the eufyCam is based on a proprietary wireless protocol; laptops and smartphones cannot detect the network or connect to it.
As a to-be perfect product, we do know there still exist many aspects of eufyCam that need further polishing. We will keep working! Thanks so much for your valuable time and feedback!
Can you elaborate more detail the connection’s made between the homebase and the mobile app.
Is the video data transmitted through your cloud services or is only the connection brokering done via the cloud services and the data to the mobile app is direct, from my homebase to my mobile device?
Who owns the encryption keys/certificates throughout the entire stack; from my homebase to my mobile phone. Can you prove this chain?
1 Like
I’m in Perth and I just bought these cameras about 2 weeks ago. I’m going to highlight some key points, for anyone who would like to quickly skim through my rant lol.
Today we had an internet outage (NBN FTTP)… so no internet, but internal network both LAN and Wi-Fi was still functional, I was able to play media from my NAS Drive, view local files from my NAS on PC, etc etc… However I had the same issue with the cameras… Nothing was recorded, AT ALL, over the 4 hours or so of the internet being down.
I also had no access to anything locally within the app while connected to Wi-Fi, i was getting “error code (99)” within the app and also “Could not connect to application server” So I was unable to disarm my sensors alarm to leave for work!
This is unacceptable for a system that claims to run completely “offline” and within its own “proprietary Wi-Fi network”. Finally the internet came back on and i’ve waited all day, still no events recorded or triggered showing in the app, even though I know there were multiple, because I was moving around within the cameras detection areas where i’d usually get notifications.
Something else slightly disturbing I figured out… While the internet was down, I had to take down one of the cameras so my partner could enter the garage and leave for work, without setting off the alarm, so I prepared a towel and to quickly twist off the camera and wrap it up in the towel to keep the siren noise down from both the alarm and the anti theft protection while I try to push the button 5 times to turn the camera off… Neither of them worked, no siren… there should have been a camera and homebase siren for the motion detected but also siren should have triggered because i was tampering with it!… So I tried the others, same thing! So it seems that this whole system just completely becomes redundant if there’s an internet outage, at least that what I experienced today.
It has been reported to eufy, anker and Direct Electronics Australia (the exclusive Aussie distributor).
I’m now seriously rethinking my purchase, unless these things are fixed fairly quickly with an update.
2 Likes
This is now a longstanding issue. For me, it is a deal-breaker: this will go back. I will also leave reviews warning users at Amazon.
Like everyone here, my system of Eufycams failed in all respects when my internet connection lapsed. Most concerning to me was that the system did not 1) record events, 2) make any alert when the camera was taken down. Were I an intruder, I could disable this flawed system in half a dozen ways, from cutting the cable on the side of the house to wifi interference. I paid for this system to have security when offline, as advertised.
Moreover, I agree with @LBX, and echo @JasonCzersk, and am in no way convinced by AnkerSupport. You sidestepped these important questions. Encryption is not an answer to the concern of 'this is being passed through Chinese servers". I paid for local storage, where I control my own content. I see evidence that that is not what I have been sold.
AnkerSupport, before returning this, sending a PDF of this set of posts to the review sites that convinced me to buy this odd product, and writing my disappointed review, perhaps you can help me understand the following:
a) This unacceptable, longstanding (Since June!!!) security issue, in which a dropped internet connection turns your cameras into paperweights, will be fixed soon. Say, by the end of March.
b) That my data remains on my device only, and is not stored in any way in your servers. I am ok with your servers mediating the link, as your (seemingly misleading) advertising copy suggests.
Please advise. Soon. I’ll set up a return with Amazon now, and mark my calendar for the 31st.
Did you get a response on this?
Glad (I’m really glad? Not sure) someone else have this problem! I got it a couple of times when trying to switch my system ON. But this morning I got it when switching it OFF! No way to access it so I woke the whole family up before I got a chance to reach the Homebase. The good thing is that, at least, the detection works, but this is not acceptable not being able to control our systems from the LAN.
Just installed the Eufy Cam 2 yesterday and very impressed with the quality of the hardware. However, and this may be a dealbreaker is that you will not receive notification of an immediate event unless it has internet access. I can live stream each camera with just wifi access, but no notifications at all which follows from the comments made in this thread. Pretty disappointing for a product being marketed as otherwise. I should have read the Amazon reviews more closely…
I just tested this today 9/22/20 using the homebase 2 and a 2C Pro camera and did not have any issues. For any future on-lookers, I think they have resolved the issue.
I wanted to ensure the cameras still recorded in the event of an internet outage (when power is retained). To test it, I kept everything powered up but unplugged the ethernet cable that runs between my modem and my Wi-Fi router. I waited about 1 minute and triggered the camera. I waited a couple more minutes and triggered it a second time. Waited a minute and then plugged the ethernet cable back in. About 30 seconds later the notifications popped up on my phone for both triggered events and provided me the recordings. Worked exactly as I had expected it should. I’ll have to do some more testing with power outage and a longer internet outage, but I’m pleased with it as of now.
Out of curiosity, did you try retrieving the recordings locally via WiFi with the internet connection still disconnected? I’m guessing that wouldn’t work since the app would be unable to authenticate to the homebase…
No, I didn’t try that, and I don’t really expect that kind of functionality.
I think they made it clear that the app has to connect to their servers in order to get clips. Your base station connects to their servers as well, hense the slight latency issue when view live.
As long as this was fix that is a good thing as there have been alot of internet outages in my area due to the cable company not upgrading the infrastructure when an apartment complex was added/built out. The congestion is too much and will continue to be until they fix.
The 2.4GHz WiFi connection between the camera/s and the home base is “Eufy private” - they use WPS to configure it and thus do not provide the name (shows as hidden using a WiFi network tool) nor password. In a normal situation, as long as the home base has “power” (battery backup if included or AC mains) and the camera/s still have battery power, detected events are stored on the home base.
You can connect via a web browser (but this only provides live view and needs the latest version of Adobe Flash Player) or from your mobile telephone Eufy Security application to your home base. Both these need the Eufy Authentication servers accessible to authenticate your login details and a working internet access “path” back to your home network - either down, no access. Then your home network needs access to your home base via ethernet cable or it’s 2.4 GHz WiFi network (you set up and configure which one being used) - no working network connection, no access. If your homes AC mains supply is down, no access unless your home network runs off a uninterruptable power source.